Quote:
Originally Posted by husslerc
it works fine just that light stays on... i hooked it up to harness i bought through scion.... anyone notice this or fix this if it isnt right?
|
If I understand you correctly, you this is the Scion authorized optional accessory. According to the install manual, it is a straight-forward Plug and Play affair.
1. Is the green L.E.D. lit on the VSE
Subwoofer? If not, check for 12 volts on pins
of the VSE Subwoofer with the ignition on.
If either pin doesn t indicate 12 volts, check
T-Harness connectors behind the radio.
2. Is the 14-pin Molex connector securely
connected to the VSE Subwoofer?
13. Test and Set Up Procedures
(a) If system is installed correctly, the VSE
Subwoofer will power up when the vehicle s
ignition is turned on. (This can be confirmed
by the lighting of the POWER L.E.D. on the
Gain Control module of the unit.) (Fig.9-5)
The manual clearly states the power LED on the gain will activate when the ignition is turned on. JRW is absolutely correct, there maybe more to it than an incorrect pinned molex. Take it to the dealership.