BAck from the dead and do I have a nugget for you. Received an e-mail a few days ago from Dustin at Brian Crower. The 2AZ-FE camshafts are
now available
Below is the email:
We will have them ready in 7-10 days. We are doing the first run of 20 sets of each profile. Please do not hesitate to get the order in as half of them are sold. $700 for the pair. They are made from a chill cast material (identical to the OEM material.
Thank you,
Dustin
-------
Brian Crower, Inc.
P: 619-825-8719
F: 619-825-9675
BrianCrower.com | BC Brian Crower Inc. - Camshafts , Crankshafts , Stroker Kits , Rods, Valves , Retainers
--------------------------------------------------------------------------------
From: Navy Life [mailto:navylife59@yahoo.com]
Sent: Wednesday, July 09, 2008 10:34 AM
To: Dustin Spencer
Subject: Re: scion tc cams 2az-fe
Thanks!!!. How soon can they be shipped, what material are they made from, what is the warranty, what is the cost of each set, and how many in stock?
Scott
www.club-tc.com
Tech Moderator
----- Original Message ----
From: Dustin Spencer <dustin@briancrower.com>
To: Navy Life <navylife59@yahoo.com>
Sent: Wednesday, July 9, 2008 11:55:16 AM
Subject: FW: scion tc cams 2az-fe
We have 3 grinds available:
BC0341 – Stage 2 can be used with OEM valve train.
Adv duration – 264 / 256
Duration @ .050 – 218 / 214
Lift - .385 / .363
BC0341 T – Stage 2 forced induction – valve spring kit required.
Adv duration – 272 / 272
Duration @ .050 – 222 / 222
Lift - .401 / .401
BC0342 – Stage 3 NA – valve spring kit required
Adv duration – 280 / 272
Duration @ .050 – 229 / 222
Lift - .415 / .401