We'll see. I know that Karl's tC was tweaked by Ripp Modds to 311WHP. They did som head work and experimented w/ regrinding the camshaft profiles. My goal is to make it to 300WHP w/o all that, letting the TRD do most of the work. Once I get to that point, then some head work and camshafts are going into the mix. Then it is time to pull the motor and tighten up the bottom end. I plan on uping the bore diameter and increasing the compression from 9.6:1 to about 10.5:1 and adding a sub injector.
__________________
How Fast Was I Going? 
|