spoiler/wing advise

[cxrey86]

[CadenceScion]

Welcome to Club-tC.com! You have a couple of options, one, buy a new rear hatch. Two, buy a spoiler/wing that lines up w/ those holes from OEM pedestal spoiler. Three, have a body shop fill in the holes, then repaint the hatch. I was fortunate when I bought my o6 tC it didn't come w/ a spoiler/wing. I love the looks of a rear wing/spoiler on the tC's, more aerodynamic, aggressive, styling...etc. I went with an Extreme Dimensions *Sniper* Spoiler.

Car and truck body kits & parts for mx3, s10, SUV, civic, neon, focus, etc.

[cxrey86]

thank you for replying. so i wont look look with the AIT battle wing? cuz it will go over the hatch so nobody will see the holes under.

[CadenceScion]

If you personally like the wing, I say go for it. The only down fall to the higher wings/spoilers is they can restrict your view out the rear window.

[cxrey86]

thank you. and nice tc by the way.

[CadenceScion]

Thank you and your more than welcome!

[navylife59]

Looking for advice or to be advise?

The Kaminari wing will block alot of your rear view, especially, if you have it in position 3 (full downforce). Unfortunately, the Kaminari end caps mount on the edges of the hatch with 3 screws. The holes that have to be drilled are very difficult to do so. You also have to have the end caps painted. They need to be done professionally as it is a major ordeal to remove the end caps. The cheap and easy would be to use body plugs to cover your existing pedestal mount holes. There are some low-profile ones that can be found at auto-body supply shops and some auto parts stores. I am about to replace mine for an APR GT-200 that, like everything else, I have had sitting on a shelf for a couple of years. I have been waiting for a CF hatch before I replace which is waiting on a Lexan rear glass, but with no shop and no capital, it has to wait.

[cxrey86]

thank you all for the advise.