chinging bearings of a s/c

s1utster138 · #1 (**permalink**) Mon., Jan 28, 2008

anyone changed the bearings from the pulley side of the s/c and have pics or a DIY.

navylife59 · #2 (**permalink**) Tue., Jan 29, 2008

I am in the middle of doing so now. Their are 2 sealed bearings pressed, side-by-side, on the pulley end. You will have to source your own replacement bearings as TRD will not sell you the parts. Best to take it to the dealership for warranty work.

s1utster138 · #3 (**permalink**) Mon., Mar 03, 2008

Quote:

Originally Posted by navylife59

I am in the middle of doing so now. Their are 2 sealed bearings pressed, side-by-side, on the pulley end. You will have to source your own replacement bearings as TRD will not sell you the parts. Best to take it to the dealership for warranty work.

any pics of you doing the bearing change and what kinda tools are you using for the bearing removal and install?

navylife59 · #4 (**permalink**) Tue., Mar 04, 2008

You will need a hydraulic bearing press. The outer bearing is pressed off first from the inside towards the outside. Then you press the inner bearing from the outside end. Be careful not to bind the shaft or you could warp it or crack the end shaft housing. I will post picks when I can.

LinkBacks (?) LinkBack to this Thread: http://www.club-tc.com/forums/forced-induction-nitrous/2443-chinging-bearings-s-c.html
Posted By	For	Type	Date
Scion tC Forums	This thread	Refback	Tue., Jan 29, 2008 12:03 PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
06 S/c and 07 S/c whats the diff???	carboncrazytc	Forced Induction and Nitrous	16	Sun., Jan 27, 2008 09:52 PM
TRD S/C Issues	navylife59	tC Knowledgebase	2	Sat., Jan 26, 2008 10:58 PM
Trd S/c	dansuke	General Discussion	2	Mon., Oct 22, 2007 01:22 AM
Available Parts For TRD S/C	navylife59	Engine	0	Thu., Oct 11, 2007 06:42 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)