blow off valve on trd s/c ??????

**carboncrazytc** · Sun., Jul 15, 2007

my buddy told me that i should put a blow off valve on my s/c but i had no idea you could i told him you couldnt but can you????

**Nick06tC** · Sun., Jul 15, 2007

Yes you can, but not advisable. People have had stalling issues. But I know of one guy that has one and did it properly and has no issues. Sounds great in person, but not easy to do.

Go with an after market BPV. Either bosch 110, or forge 007

**StreetracerJay** · Sun., Jul 15, 2007

Does anyone know where to hook it up at? I want to do it.

**carboncrazytc** · Sun., Jul 15, 2007

BPV????? still trying to learn.

**carboncrazytc** · Sun., Jul 15, 2007

boost pressure valve correct??

**Nick06tC** · Sun., Jul 15, 2007

BPV-----By Pass Valve
BOV----Blow Off Valve

The BPV on the TRD supercharger is behind the throttle body on the tc.

**MkhoiD** · Sun., Jul 15, 2007

any pictures that shows it ?

**StreetracerJay** · Sun., Jul 15, 2007

why do people have stalling problems??? too much air or to little??????

**carboncrazytc** · Sun., Jul 15, 2007

good question why is that. the only reason i can think of is to little. but then again im not that intelgent when it comes to forced induction..

**navylife59** · Mon., Jul 16, 2007

The MAF already accounts for the air that is being expelled by the blow-off, therefore the engine will run extremely rich and stall. This was my setup using the TurboXS RBV-25. I am in the works building a custom RAM setup using the Greddy Type RS with BPV adapter. It should have a dramatic flow increase over the stock setup. I hope and can correctly calculate the MAF timing to flow rate.

blow off valve on trd s/c ??????-turboxs-rbv-25.jpg

**MkhoiD** · Mon., Jul 16, 2007

where does the BOV/BPV go?

**navylife59** · Mon., Jul 16, 2007

Like the pic shows, it is in the discharge tube between the S/C and the TB (throttlebody).

**StreetracerJay** · Mon., Jul 16, 2007

How does the TurboXS RBV-25 sound? Also what do I need to make it work? Does yours run perfect or are you having problems too? What do u mean building a custom RAM setup using the Greddy Type RS with BPV adapter? where do u buy bpv adapter?

**navylife59** · Tue., Jul 17, 2007

The TurboXS makes an audible sound, but not that loud, nowheres near a BOV. It is a simple, direct replacement of the insufficient stock Bosch piece; 2 hose clamps.

I bought my Greddy RS w/ BPV fitting from Jotech Racing at a good price. Tell them Scott with the Blue S/C tC sent ya. That is if you choose to call.

**carboncrazytc** · Tue., Jul 17, 2007

what about a raptor blow off valve i heard there real loud.

**MkhoiD** · Tue., Jul 17, 2007

how much is it?

**carboncrazytc** · Tue., Jul 17, 2007

hold on ill look and c..

**carboncrazytc** · Tue., Jul 17, 2007

heres a good website with lots of choices. Blow Off Valves

**navylife59** · Tue., Jul 17, 2007

You can't just run an open BOV. You have to be able to convert it to BPV.

**carboncrazytc** · Tue., Jul 17, 2007

o ha shows how much i know. ok dumb question if you are running a piggy back would that eliminate the too rich problem...?

blow off valve on trd s/c ??????

LinkBack

Thread Tools

blow off valve on trd s/c ??????

Thread Information

Users Browsing this Thread

Similar Threads

TRD s/c tamper-proof key, bypass valve ? and speed limiter flash

Making More Power All Without A Kanorter Valve

Brian Crower To The Rescue: Cams/Stroker Kit/Valve Train

engine/valve cover?

CAI and bypass valve question

Posting Permissions