Does anyone know if AEM offers a Base Map for a Turbo tC??? If not, do i need to tow it to a tuner shop when everything is installed so i don't damanage anything or will i be fine driving it there carefully?
Welcome to Club-tC.com
Scion tC enthusiasts from all over the world are here to help:
...then you have come to the right place!
we will try to help you with your problem.
YES! I want to register an account for free right now!
p.s.: You will not see this message once you register!
This is a discussion on AEM F/IC Turbo Base Map within the Forced Induction forums, part of the Scion tC category; Does anyone know if AEM offers a Base Map for a Turbo tC??? If not, do i need to tow ...
Does anyone know if AEM offers a Base Map for a Turbo tC??? If not, do i need to tow it to a tuner shop when everything is installed so i don't damanage anything or will i be fine driving it there carefully?
im not sure AEM does i will look into that when i have some free time but i would tow it and have it tuned at a shop just to be on the safe side
Turn your boost way down and run the stock ECM. If your A/F, O2, and MAF sensors are still in place, then the ECM should be able to handle things with the boost turn down to below 5PSI. There are stage I turbo kits out there that run less than 6 PSI with no piggyback emanage. Just don't romp on it. Any doubts, have it towed.
How Fast Was I Going?
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
There are currently 1 users browsing this thread. (0 members and 1 guests)