Window Button LED is Flashing

[GoomazegoM]

I removed the door panel to stuff some foam in there because my door was vibrating with my speakers. I unplugged the couple that was in there, did the job, and put it back together. The drivers window won't auto up/down anymore. It still works, just won't do it with one push. And the LED in the button is blinking now. Any clues?

[TAT2]

GoomazegoM, you will have to re-set the windows memory,follow those step to correct the window settings.

Step#1. Turn the key in the ignition to on.

Step#2. On the driver's side control, push down (do not use 'one-touch' down) the power window switch for the driver's side window and lower the window halfway.

Step#3. Pull up (do not use one-touch up) the power window switch until the window closes and hold the switch for "at least" one second.

Step#4. If needed for the passenger side repeat these steps for the passenger side window on the passenger door window control.

Hope this helps,
Tat

[GoomazegoM]

Excellent! That worked... thank you very much!