Size does matter!

[chicotunner07]

OK so i know that the tc rim bolt pattern is 5x100, does this mean that any rim with 5x100 bolt pattern will fit, or does the offset really matter, and if it does what offset do i need?

[ThetC]

yes, any 5x100 will fit, you just have to be aware about lowering the car and rubbing, i have 18x8.5 and a 35 offset, and i just ordered my h-techs today and i shouldnt have any problem, i think a good set up for you would be a 5x100 18x7.5 or 18x8 with a 35-38 offset and slam it on some s-techs, that **** will look nasty, my boy has that setup, goodluck

[chicotunner07]

Thanks, im waitin on some h-techs, and the rims i was lookin at were 18x8 inch Rota Torque wheels, i found them with a 48mm offset and i was thinkin that it was too much, what do u think

[tcchillin]

too much! they will stick out, you will need spacers, not a comfortable drive at all!

[navylife59]

I read of someone runn'n 18x8's with +42mm offset.

[chicotunner07]

so can u confirm this any way, now im gettin falken hanabis, they sell 18x7.5 with a 45mm offset, and they have 18x8.5 with a 38mm offset, im told the 18x7.5 will fit with no problem, but i really want the wider 8.5 hanabis, what do u guys think? heres a link http://www.edgeracing.com/2006/Scion/tC/wheels/18/ scroll down, they are the bronze hanabis