Removing The Center Console/Shifter Assembly

[navylife59]

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
(Manual Transaxle)
(a) Turn the shift lever knob counterclockwise and
remove the shift lever knob.
2. REMOVE UPPER CONSOLE PANEL
(a) Using a moulding remover, detach the 6 claws.
HINT:
Tape the moulding remover tip before use.
(b) Disconnect the connector.
(c) Remove the clamp and console panel.

[navylife59]

DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


(a) Remove the 2 clips and disconnect the cable ends
of the control cable.


(b) Using a screwdriver, release the cable locks of the
shift cable and select cable.


(c) Turn the lock nuts 180° counterclockwise, and hold
them in that position to remove the shift cable and
select cable.
(d) Remove the shift cable from the floor shift shift lever
assembly while holding the lock nut.
(e) Repeat the above process for the select cable.
NOTICE: Do not push in the cable locks.