Registration is FREE and takes seconds to complete!
Club-tC Members Receive:
? Advertisement Free Browsing
? Access to all tC Tech Articles
? Ability to post questions and comments
? Use of private message system
? Ability to share images
? Their own personal profile page
? More tC information then anywhere else
Sign Up Now!

Aftermarket Stereo Installation

Discussion in 'Audio, Video, and Multimedia' started by Alex8181, Feb 28, 2006.

Thread Status:
Not open for further replies.
  1. Alex8181
    Offline

    Alex8181 Administrator

    Joined:
    May 16, 2005
    Location:
    2005 Flint Mica
    Written By: Alex8181

    Difficulty (1-5): 2
    Time Frame: 30 Minutes

    Be careful when doing this modification when handling your center console and especially the stereo door. They are easily scratched (don't ask how I know).

    Step 1: Remove the negative battery terminal with a 10mm wrench.

    1.jpg

    Step 2: Remove the shift knob by turning it counter-clockwise.

    2.jpg

    Step 3: There are 6 clips holding the bottom center console to the car. You can remove it by just pulling from the top to the bottom.

    3.jpg

    Step 4: Remove the electrical plug that connects to the lighter.

    4.jpg

    Step 5: There are 8 clips holding the upper center console to the car. Again just pull the piece off but from the bottom up.

    5.jpg

    Step 6: Now remove the electrical plug that connects to the temperature control.

    6.jpg

    Step 7: Remove the four bolts that are holding the stereo and stereo brackets.

    7.jpg

    Step 8: Remove the stereo harness and the antenna plug from the back of the stereo.

    8.jpg

    Step 9: If you want to re-use the stereo brackets than remove the 4 bolts holding it to the stereo. Otherwise use an aftermarket installation kit and install the stereo in the reverse order you removed it.

    9.jpg
     
    jeffquenzer likes this.
Thread Status:
Not open for further replies.

Share This Page