Registration is FREE and takes seconds to complete!
Club-tC Members Receive:
? Advertisement Free Browsing
? Access to all tC Tech Articles
? Ability to post questions and comments
? Use of private message system
? Ability to share images
? Their own personal profile page
? More tC information then anywhere else
Sign Up Now!

Door Panel Removal

Discussion in 'General Automotive' started by Alex8181, Jul 20, 2006.

Thread Status:
Not open for further replies.
  1. Alex8181
    Offline

    Alex8181 Administrator

    Joined:
    May 16, 2005
    Location:
    2005 Flint Mica
    Written By: Alex8181

    Difficulty (1-5): 2
    Time Frame: 20 Minutes

    Step 1: Use a small flathead screwdriver to pry the small plastic flap in the door handle area. Behind it is a screw that will need to be removed with a philips screwdriver. You do not need to remove the plastic piece, just the screw.

    01.jpg

    Step 2: Use a flathead or your fingernails to pry open the front portion of the long door handle. It should come off easily.

    02.jpg

    Step 3: There are two screws behind that panel on either end of the door handle. Once those are removed, slowly pry along the edge of the panel and pull away from the door. The rest of the panel is held on with plastic plugs that should come right out.

    03.jpg

    Step 4: Unplug the wires behind the door panel from the panel itself. There are two sets of wires on the driver side and one on the passenger side.

    04.jpg

    Step 5: You should now be able to remove the door panel completely. Installation is the reverse of this.

    05.jpg

    06.jpg
     
Thread Status:
Not open for further replies.

Share This Page