Registration is FREE and takes seconds to complete!
Club-tC Members Receive:
? Advertisement Free Browsing
? Access to all tC Tech Articles
? Ability to post questions and comments
? Use of private message system
? Ability to share images
? Their own personal profile page
? More tC information then anywhere else
Sign Up Now!

Engine Specifications

Discussion in 'Engine' started by navylife59, Oct 7, 2007.

Thread Status:
Not open for further replies.
  1. navylife59
    Offline

    navylife59 Super Moderator Staff Member

    Joined:
    Mar 22, 2006
    Location:
    Emory, Texas or Gretna, LA
    Model tC
    Body code 2.4L

    Year 2005-06
    Engine Code (VIN) 2AZ-FE (VIN 5 = D/E)
    No. of cylinders/Type 4/DOHC
    Capacity cm3 2362
    Output hp/rpm 160/5700
    Torque 162/4000
    Ignition system Description Mapped-DI
    Trigger location Camshaft, crankshaft
    Fuel system Make Toyota
    Type TCCS
    Description Multi-port, sequential
    Air metering Type Mass meter
    Firing order 1-3-4-2
    Ignition timing BTDC aEngine/rpm 5-15/700 Not adjustable
    Idle speed (curb) rpm 700±50 Not adjustable
    Alternative (curb) rpm AT=660±50 Not adjustable
    O E Spark plugs Make Denso
    Type SK20R11
    Electrode gap mm 1.0-1.1
    Valve lash - intake mm 0.19-0.29 cold
    Valve lash - exhaust mm 0.30-0.40 cold
    Compression pressure bar 13
    Oil pressure bar/rpm 2.5-5.4/3000
    Engine oil grade - cold climate SAE 5W/30 Semi-Synth.
    Moderate climate SAE 5W/30 Semi-Synth.
    Hot climate SAE 5W/30 Semi-Synth.
    Engine oil classification API SL
    Engine with filter quarts 4
    Gearbox oil grade SAE 75W/90
    Manual drain and refill quarts 2.6
    Automatic transmission fluid Type T-IV
    Automatic drain and refill quarts 3.7
    Cooling system quarts 7.2 AT=7.1
    Brake fluid Type DOT 3
    System quantity quarts
    Power steering fluid Type Dexron II/III
    System quantity quarts
    Brake dimensions
    Minimum rotor thickness - ventilated front 23 mm
    Minimum rotor thickness rear 7.5 mm
    Thickness variation front/rear
    Rotor runout front/rear 0.05 mm/0.15 mm
    Maximum drum diameter rear 174 mm
    Minimum pad thickness front/rear 1 mm/1 mm
    Minimum shoe thickness rear 1 mm
     
  2. navylife59
    Offline

    navylife59 Super Moderator Staff Member

    Joined:
    Mar 22, 2006
    Location:
    Emory, Texas or Gretna, LA
    Engine Torque Specs

    Cylinder head Renew bolts – – –
    Maximum bolt length 164.2 mm
    Torque 29 ft. lbs.
    Torque 58 ft. lbs.
    Loosen
    Individually loosen
    Torque 90°
    Run engine – – –
    Wait – – –
    Individually loosen – – –
    Torque – – –
    Run engine – – –
    Wait – – –
    Individually loosen – – –
    Torque – – –
    Torque – – –
    Main bearings Renew bolts/nuts
    Stage 1 1)15 ft. lbs. 2)30 ft. lbs.
    Stage 2 3)90°
    Big end bearings Renew bolts/nuts
    Stage 1 1)9 ft. lbs.
    Stage 2 2)18 ft. lbs. 3)90°
    Oil pump to cylinder block 14 ft. lbs.
    Oil pan bolts 7 ft. lbs.
    Oil pan drain bolt 30 ft. lbs.
    Drive plate 72 ft. lbs.
    Torque converter 30 ft. lbs.
    Flywheel 96 ft. lbs.
    Clutch cover to flywheel 14 ft. lbs.
    Crankshaft pulley/damper center bolt 133 ft. lbs.
    Camshaft sprocket/gear 40 ft. lbs.
    Camshaft carrier/cap
    Camshaft/valve cover 8 ft. lbs.
    Intake manifold to cylinder head 22 ft. lbs.
    Exhaust manifold to cylinder head 27 ft. lbs.
    Spark plugs – – –
    Crankshaft position sensor 7 ft. lbs.
    Oxygen sensor (Lambda) 32 ft. lbs.
    Knock sensor 15 ft. lbs.
    Front hub 159 ft. lbs.
    Rear hub 103 ft. lbs.
    Steering track rod end 36 ft. lbs.
    Brake caliper to carrier front 25 ft. lbs.
    Brake caliper carrier to hub front 79 ft. lbs.
    Brake caliper to carrier rear
    Brake caliper carrier to hub rear 34 ft. lbs.
    ABS sensor front/rear 6 ft. lbs./–
    Road wheels 76 ft. lbs.

    ft. lbs.=foot pounds
    ins. lbs.=inch pounds
    °=angular torque
    =proceed to next stage
    Tightening Sequence.JPG
     
  3. navylife59
    Offline

    navylife59 Super Moderator Staff Member

    Joined:
    Mar 22, 2006
    Location:
    Emory, Texas or Gretna, LA
    2AZ-FE Closeups

    2AZ-FE Lower Intake Manifold (plastic)
    2AZ-FE Lwr Intake.JPG

    Throttle Body Side
    2AZ-FE TB.JPG

    Pulley Assembly
    2AZ-FE Front.JPG

    Primary Cat View From Header Collector
    Primary Cat.JPG

    2AZ-FE Intake Side
    2AZ-FE Intake Side.jpg

    Lower Intake Manifold - Removed
    2AZ-FE Intake - Removed.jpg

    Valve Lifter Buckets
    Valve Lifter Buckets.jpg

    Valve Lifter Bucket Exposed
    Valve Lifter Buckets Exposed.jpg

    Exhaust Valve With Retainer, Locks, and Spring
    Exhaust Valve Retainer-Locks-Spring.jpg

    Chain Driven Oil Pump
    Chain Drive Oil Pump.jpg

    Crankshaft and View Of Balancer Shafts
    Crankshaft Balance  Drive Gear.jpg
     
Thread Status:
Not open for further replies.

Share This Page

Users found this page by searching for:

  1. 2007 scion tc torque specs

    ,
  2. 2006 2.4 toyota scion head torgue

    ,
  3. 2007 scion tc brake caliper torque specs

    ,
  4. 2007 scion tc transmission drain bolt