Registration is FREE and takes seconds to complete!
Club-tC Members Receive:
» Advertisement Free Browsing
» Access to all tC Tech Articles
» Ability to post questions and comments
» Use of private message system
» Ability to share images
» Their own personal profile page
» More tC information then anywhere else
Sign Up Now!

Parking Brake Connected to Rear Brake Pads?

Discussion in 'Suspension & Brakes' started by theriverlethe, Jul 7, 2009.

  1. Offline

    theriverlethe New Member

    Member Since:
    Jul 7, 2009
    I was just told that my rear brakes are worn down the metal and need to be replaced. The last time I had the car serviced, about 3000 miles ago, brakes were at 5/32. He suggested as an explanation that I might've left the parking brake on while driving. Is this plausible? Are the regular brakes connected to the e-brake on the Scion tC? Thanks in advance.
  2. Offline
    • Staff / Moderator

    navylife59 Super Moderator

    Member Since:
    Mar 22, 2006
    Location:
    2005 Scion Tc
    E-brake is mechanically connected to a set of brake shoes in side the rear rotor in a drum fashion. The actual rear brakes are pads actuated solely by the caliper. These are two separate systems that interface together at the rear rotor/drum . Leaving the e-brake on or even power sliding will have no effect on the pads.
  3. Offline

    punk2m1d New Member

    Member Since:
    Apr 8, 2008
    Location:
    2008 Scion tC
    Fun Fact: A lot of car manufacturers are calling it a "parking brake" now, because some dumb old lady freaked out at some point and pulled the e-brake because she said, "It was an emergency". As you can guess, this threw her car into an uncontrolled slide and made everything 10x worse. Idiots like these cause changes for everyone else.
  4. Offline
    • Staff / Moderator

    navylife59 Super Moderator

    Member Since:
    Mar 22, 2006
    Location:
    2005 Scion Tc
    Well, granny was just doing the first power slide!:driving:

Share This Page