TYC LED Tail Lights/Etched Scion Acrylic Cubby Panel (10/12/2010)

10/12/2010 (Updated Mods)

Its now official, my Spec-D Tail Lights are out and the TYC LED Tail Lights are in. The swap was really simple, I removed the black plastic tabs on the bottom of the tail lights so I didn't have to remove my rear bumper. I tested the tail lights to assure that all the lights worked and everything looks sick. After the tail lights were installed, I tackled taking the center console apart to install the Scion Acrylic Cubby Panel. I applied the parking break and moved the gear shifter from Park to Drive to allow the center console to come up and over the shifter. I also unclipped the bottom part of the waterfall, I put the cubby plate in place and reattached everything. The cubby panel lined up w/o a hitch and I didn't not need to trim or remove any of the black clips that hold everything in place. Everything I took apart went back together w/o anything breaking or cracking and lined back up where its suppose to be.

I also need to mention that the OEM tail light wiring harness/plug does work w/ the TYC Tail Lights and I did not need to alter anything. Pictures Below! Enjoy